EPDM Roofing membrane

Water-damming layer for flat and slightly pitched roofs

Extremely flexible roofing membrane, insensitive to UV radiation and ozone, for flat and slightly pitched roofs.

Pandser EPDM roofing membrane is a thick European synthetic membrane. EPDM roofing membrane is suitable for flat and gently sloping roofs. This can be either a green roof, ballasted system or fully adhered system.

With Pandser EPDM roofing membrane there is a solution for every processor. A standard measured prefabricated membrane, delivered exactly to the size of your roof or cut from the roll at a Pandser dealer and get to work immediately

Characteristics of Pandser EPDM roofing membrane

Proven service life of at least 50 years
Root resistant and suitable for green roofs
Permanently elastic (> 400% elongation)
Can be applied without an open flame
UV and ozone resistant
Resistant to temperatures from -35 to +120 degrees

Processing

Make substrate free of splinters and dust
After bonding, always press/roll Use
Pandser Marking Pen for marking
Roof surface bonding with spray adhesive (Pandser Spraybond XF) or with Pandser PU-Bond
Roof curb and upstand with contact adhesive (Pandser Bonding adhesive)
Spray/lubricate both substrate and EPDM

Choose an application

Roof

Floor

Facade

Gutter

Range

Thicknesses

1.2 and 1.5 millimeters

Widths

Ranging from 2.8 to 7 meters

Delivery project-based per roll or m²

Per roll, in m² or one piece

Available dimensions and thicknesses

PANDSER EPDM roofing membrane	1.20 mm
3,00 x 4,20 m per stuk
3,00 x 5,60 m per stuk
3,00 x 7,00 m per stuk
4,50 x 7,00 m per stuk
2,80 x 30 m per rol
3,50 x 30 m per rol
4,20 x 30 m per rol
5,60 x 30 m per rol
7,00 x 30 m per rol
2,80 m x 1,20 mm per m²
3,50 m x 1,20 mm per m²
4,20 m x 1,20 mm per m²
5,60 m x 1,20 mm per m²
7,00 m x 1,20 mm per m²

View all dimensions and thicknesses

Back to the overview